Silver ring with red perspex switch, inspired by industrial machinery. The switch is movable but is kept in place by two silver rivets and tubing. Ring shank was soldered onto the top before the piece was riveted together. The switch handle was made from tubing, soldered onto a silver ball with one whole.
30 x 25 x 30mm
Silver brooch with threaded & movable red glass handle. Piece is electro engraved, with two large rings soldered on top. Lettering executed with traditional letter stamps for a industrial aesthetic.
60 x 60 x 2mm
Adjustable handmade silver ring. This piece was inspired by an old style printing press. The orange glass handle moves up and down on 3mm threaded wire, which is soldered into the handle. The orange glass handles were also made by hand from glass cane.
40 x 45 x 9mm
Double switch brooch with steel pin fastening. Two sheets of 1mm silver were riveted together, trapping the switch handles. The blue glass handles were hand made using glass rod + torch. The turquoise and yellow mock buttons were glass kiln made and rounded off using a diamond pad then set with a traditional push setting.
50 x 30 x 1.2mm
Silver ring inspired by industrial machinery. This piece was electro etched and oxidised. For the electro etching certain areas were protected using sticky vinyl. The needle is riveted, but still movable. Ring shack is soldered on one side.
32 x 16 x 25mm